Rapid Air cast vinyl wrapping film is appropriate for surfaces that are slightly curved and uneven. The unique adhesive permits adhesion to corrugated and uneven surfaces as well as lacquered surfaces. For more curved surfaces, corrugations, and rivets, the product should be worked in, cut, and applied with an overlap at the edge. With the right tools, it is simple to remove the applied material.  

  

Oracal 970RA – Rapid Air – Orafol’s film for effective car wrapping  

 
Oracal 970RA – Rapid Air, a line of car wrapping films created by the firm Orafol, was created specifically for entire vehicle wraps and high-quality, long-lasting parts. These Orafol films are not only distinguished by their high-quality surfaces but also by the special adhesive with Rapid Air technology, which enables particularly quick, efficient, and bubble-free bonding of even large pieces of film – even over strongly curved surfaces, over rivets, and in beads. Because of the vast variety of Oracal 970 colours, the Oracal 970RA – Rapid Air film series allows for the creation of the unique vehicle designs of the most superb quality.    

 
  

Features and characteristics of Oracal 970RA – Rapid Air Car-Wrapping Film on a technical level  

  Premium PVC films are used in the Oracal 970RA – Rapid Air Car Wrapping films. These cast multi-layered car wrapping films offer excellent processing characteristics since they are multi-layered. The series’ films come in 96 colours, including high-gloss, matte, and super-matte hues as well as a wide range of metallic hues. The Oracal 970RA – Rapid Air is distinguished by exceptionally high dimensional stability and gloss retention when glued because of the cast film quality. It may be inserted into deep grooves and over strong curves by cutting and overlaying, and it is appropriate for vehicle wraps on flat and slightly curved surfaces.  

The Oracal 970RA – Rapid Airfoils have a particular covering paper that is siliconized on both sides, which allows for the introduction of extremely small air passages into the adhesive. These make sure that the films are processed quickly and extremely effectively. Because even with big film formats, trapped air may be easily expelled thanks to the air passages. Depending on the colour chosen, Oracal 970RA – Rapid Air automobile wrapping film can endure outdoors for up to 6 years when professionally installed. Once it has attained its final adhesion, it is resistant to the majority of oils, fats, chemicals, and fuel and is acceptable for washing in the car wash.  

 

It impresses with very good temperature resistance and seawater resistance and shrinks very little when attached. Oracal 970RA – Rapid Air Wrapping film can be easily removed from the surface under the influence of heat even years after it has been expertly applied on intact and fully cured paintwork. To achieve ideal processing characteristics and adhesive adherence, Oracal 970RA – Rapid Air films should not be bonded at temperatures lower than 15 °C.  

 

The Vinyl Corporation sells Oracal 970RA – Rapid Air Car Wrapping Film.  

 
We provide the premium Oracal 970RA – Rapid Air Wrapping film in all colours as factory-fresh products at a cost-effective wholesale rate. Order simply online right away and complete your purchase from our well-stocked online store, where you can get practically any car wrapping film, with expert bonding equipment and care supplies designed especially for car wrapping films. Direct delivery to your home is what we do fast and dependable.  

  

  

  

What is Oracal 970 used for?  

The 110 micron, multi-layer Oracal 970 Premium wrapping film is cast PVC and comes in 96 matte and glossy colours. This item is perfect for full or partial solid wraps on vehicles, fleet vehicles, and in motorsport.  

  

Can you use oracal vinyl to wrap a car?  

Product details. Designed for comprehensive, long-term covers in solid, opaque colours of fleet and motorsport cars. covers corrugations, rivets, and curved surfaces. This is oracal car wrap uses and what makes it ideal.  

  

Is Oracal 970 permanent?  

longevity of up to six years. Transparent, re-positionable, solvent polyacrylate adhesive.  

 

 

What is the strongest oracal vinyl?  

Premium cast vinyl includes Oracal 751 and 951. They are designed for the highest level of outdoor conformability and durability.  

  

Technical information about Oracal 970 Rapid Air cast wrapping vinyl

 

• highest gloss retention, resilience, and toughness   
• Having been cast in several layers, it is extremely dimensionally stable.   
• Rapid-Air Technology // Air ducts  
• Licenced for usage in the StVZO area  
• 110 Material thickness  
• suitable for automobile wrapping and comprehensive vehicle covering   
• Polyacrylate adhesive is a solvent that is transparent, permanent, and re-positionable.   

   

 At the vinyl corporation, we are one of the leading oracal 970 vinyl suppliers in the UK. View our intensive oracal 970 catalogue for more information about what we provide.