Read our blog on how furniture wrapping may quickly change old into new.

Vinyl can be used to wrap many objects.

Because vinyl wrapping is less expensive and more transient than painting, it is a fantastic option to alter the appearance of your object. You can probably apply a vinyl wrap to any object with a flat surface. Custom table wraps, vinyl vehicle wraps, guitar wraps, laptop skins, custom Door Wraps, and custom Fridge Wraps are just a few of the numerous sorts of custom vinyl wraps you can use.

 

Why vinyl furniture covers are preferred?

Any piece of furniture, whether it be for your house or workplace, will eventually require new paint. The unfavourable part is that water will ruin the wood, rendering most stains impossible to remove. It happens because furniture’s paint gets dirty and dingy from being used frequently. Covering furniture with vinyl is the best upcycling technique to turn old things into new ones and give them a new life. Wrapping anything with vinyl wraps is one of the best, most cost-effective, and easiest ways to revitalise worn-out furniture.

Therefore, we’ll examine how and why vinyl furniture coverings are superior in this blog. You can count on The Vinyl Corporation to offer the top products if you’re searching to acquire some. The first and most important advantage of using a desk vinyl wrap for furniture in your house or place of business is how affordable it is.

Furniture coverings made of vinyl have the following benefits:
• Renew current surfaces as opposed to replacing them.
• Utilise a variety of materials and finishes, customization enables you to cover furniture that is uniquely yours.
• Upcycle furniture reduces expenditures and rubbish that would end up in landfill.

Also, not forgetting that it aids with:
• financial situation
• Better for labour costs
• No need to use Paint
• Convenient when it comes to supplies

If you really want to adhere to a showstopping effect, using coloured finishes to add eye-catching colour bursts, high gloss surfaces, or sumptuous matte coatings can really add dimension to your furniture.

 

Time-saving.

When it comes to giving old furniture a fresh look, paint takes a long time. It’s because it calls for several coats. The amount of time required for preparation and finishing touches also extends the drying period of the paint.
But with vinyl wrap, you just need to apply it once, and then you’re done.
Increased flexibility
You have a lot of flexibility when you wrap your furniture with vinyl. You can select from an array of colours and styles, and textures . from the vinyl corporation.
Additionally, vinyl furniture covers can be cleaned with a damp cloth, unlike painted surfaces harmful which can cause harm to the wood.
Plus, little thought is needed because painting your furniture will take a lot of time and money, you must weigh up all of your possibilities. To make the furniture sturdy and monotonously long-lasting, you’ll often have to paint it.
You don’t need to think much about vinyl wrap because you can quickly redo it and it won’t cost you a lot of money.

How to Apply Vinyl to furniture.

1. Prepare the surface
The surface to which you plan to apply the vinyl wrap must be cleaned. The best way to accomplish this is with a cleaning product spray. After that, wipe with a wet cloth. Before putting your vinyl furniture cover, wipe the surface with a dry cloth or towel and make sure it is completely dry.
2. The area is measured.
Next, take a measurement of the surface you intend to vinyl wrap. To account for overcutting and in case you put the vinyl at an angle, you need to leave at least 3 cm on each side.

3. Cut the vinyl wrap to size.
Use a pair of scissors with a sharp blade to cut the vinyl in a straight line. Mark the vinyl with a ruler before cutting to make sure it is cut with a straight edge on either side.

4. Peel back the vinyl edge.
On one side, remove the vinyl. The backing paper should be tucked underneath after being folded back on itself. The adhesive side of one piece should now be exposed and prepared to be applied to the furniture.

5. Attach the vinyl wrap to the edge of the surface.
The peeling edge of the vinyl should be secured to the surface. Make sure it is aligned and straight. This enables the vinyl to be applied to the furniture in a straight line. Join the edges to the edge of the surface. If you’d like, you can leave it to dangle a few centimetres longer and then clip the excess away. If you have a straight line, it is preferable to align this part straight.

6. Apply the vinyl wrap using the squeegee.
Squeegee the vinyl onto the surface with one hand. Use a card, folded cardboard, or anything else that is firm and flat. The underneath backing paper can then be removed using the opposite hand. Continue to squeegee the vinyl wrap onto the furniture as you go, gradually pulling back the backing paper. The vinyl furniture wrap will adhere to the surface as you go.

 

 

 

 

 

 

 

 

 

 

 

Come and check out our range of vinyls here at The Vinyl Corporation